von Folge | Aug. 19, 2026 | ISBM Machine Blog
Child-resistant closure (CRC) systems for pharmaceutical bottles work on mechanical tolerances that are among the tightest in consumer packaging — tighter than standard beverage closures, tighter than aerosol valve assemblies, and significantly tighter than the... von Folge | Aug. 19, 2026 | ISBM Machine Blog
Pharmaceutical container material selection sits at the intersection of formulation chemistry, regulatory science, and manufacturing process capability. The decision is not reversible without a regulatory submission — changing the container material for an approved... von Folge | Aug. 19, 2026 | ISBM Machine Blog
Good Manufacturing Practice regulations for pharmaceutical primary packaging are not a product specification — they are a process assurance framework. The distinction matters because it means regulatory scrutiny falls on the machine, its control systems, and the... von Folge | Aug. 19, 2026 | ISBM Machine Blog
Production teams switching from 500ml oil bottle production to 5L jug formats typically see scrap rates climb from 1.5–2% to 4–8% without any apparent change in machine setup. The larger container is not simply a scaled-up version of the smaller one — it presents a... von Folge | Aug. 19, 2026 | ISBM Machine Blog
HDPE and PET have co-existed in the edible oil packaging market for three decades. The decision is not about brand preference — it is about matching material properties to the specific oil formulation, retail environment, regulatory framework, and recycling... von Folge | Aug. 19, 2026 | ISBM Machine Blog
Edible oil jugs with integrated handles present a manufacturing question that precedes machine selection: which process route — extrusion blow molding (EBM) or injection stretch blow molding (ISBM) — produces the better container, and at what trade-offs? The answer...