{"id":1752,"date":"2026-09-08T03:44:30","date_gmt":"2026-09-08T03:44:30","guid":{"rendered":"https:\/\/ever-powers.com\/?post_type=product&p=1752"},"modified":"2026-09-08T03:51:40","modified_gmt":"2026-09-08T03:51:40","slug":"hcy11112023-crane-outrigger-support-hydraulic-cylinder","status":"publish","type":"product","link":"https:\/\/ever-powers.com\/nl\/product\/hcy11112023-crane-outrigger-support-hydraulic-cylinder\/","title":{"rendered":"HCY11112023 Crane Outrigger Support Hydraulic Cylinder \u2014 \u03a6140\u00d7\u03a6120\u00d7640 | 30 MPa"},"content":{"rendered":"
\n

<\/p>\n

\n

SEO Keyword Strategy \u2014 HCY11112023<\/h2>\n

Core Keyword:<\/strong> crane outrigger support hydraulic cylinder<\/p>\n

Related Keywords:<\/strong> crane stabilizer jack cylinder \u00b7 outrigger vertical support cylinder \u00b7 hydraulic crane leveling cylinder \u00b7 mobile crane jack cylinder replacement<\/p>\n

Long-Tail Keywords:<\/strong> hydraulic outrigger jack cylinder for mobile crane \u00b7 crane outrigger support cylinder vertical load capacity \u00b7 replacement crane stabilizer cylinder bore and rod verification<\/p>\n<\/div>\n

<\/p>\n

HCY11112023 \u2014 Hydraulic Outrigger Jack Cylinder for Mobile Crane Vertical Stabilization<\/h2>\n

The HCY11112023 crane outrigger support hydraulic cylinder<\/strong> is a high-pressure vertical jack actuator designed to transmit the crane’s reaction loads from the outrigger pad to the ground during lifting operations. With a 140 mm bore, a 120 mm piston rod, a 640 mm stroke, and a working pressure of 30 MPa, this cylinder belongs to the crane’s primary structural stabilization system \u2014 the set of components that keeps the crane level, stable, and safely supported throughout every lift cycle. Its function is categorically different from the outrigger extension cylinder that positions the outrigger beam horizontally; this cylinder’s job is to bear vertical load<\/strong>, transfer it to the ground pad, and hold the crane in its leveled position for the duration of the operation.<\/p>\n

Specification model reference: HCYY11112023. Procurement engineers, crane maintenance managers, and technical buyers evaluating this cylinder for replacement or OEM integration should understand that a crane outrigger support cylinder is one of the most structurally critical hydraulic components on the machine. Its bore, rod diameter, stroke, installation distance, working pressure, and mounting geometry together determine not only whether the cylinder fits the crane, but whether the crane can be leveled correctly, whether the reaction load is safely transferred to the ground, and whether the structural stability margins designed into the crane by its manufacturer are maintained in service.<\/p>\n

<\/p>\n

\"HCY11112023<\/div>\n

<\/p>\n

Hydraulic Outrigger Jack Cylinder for Mobile Crane \u2014 Structural Role and Load Transfer Mechanics<\/h2>\n

After the outrigger beams have been extended to their working width by the extension cylinders, the outrigger support cylinder takes over as the primary structural actuator in the stabilization sequence. It extends vertically downward from the end of the deployed outrigger beam, driving the outrigger foot pad into contact with the ground and then continuing to extend until the crane’s chassis is lifted clear of its road wheels \u2014 or in some configurations, until the wheel load is substantially reduced \u2014 and the crane stands firmly on its four outrigger contact points.<\/p>\n

At this point the crane’s entire operating weight, plus the dynamic forces generated by every lift cycle, is transmitted through the four outrigger support cylinders to the ground pads. Each cylinder carries a share of the total crane reaction force that depends on the crane’s center of gravity position, the load being lifted, the load radius, and the slewing angle. In worst-case operational conditions \u2014 a heavy lift at maximum radius with the boom swung over the side \u2014 the leeward outrigger cylinder pair can experience load concentrations significantly higher than a simple quarter-share of the crane’s total weight. This is why the structural integrity of the outrigger support cylinder, and its correct installation and maintenance, are inseparable from the crane’s load chart compliance and operational safety.<\/p>\n

The HCY11112023 cylinder also performs the leveling function. Ground conditions at crane setup sites are rarely perfectly level, and the four outrigger cylinders must extend to different lengths to compensate for site slope and to bring the crane’s superstructure to a true level plane. This requires each cylinder to hold its individually determined extension position precisely and independently \u2014 a function that depends on the quality of the load-holding valve system in the hydraulic circuit as much as on the cylinder’s own seal integrity.<\/p>\n

<\/p>\n

\"HCY11112023<\/div>\n

<\/p>\n

Replacement Crane Stabilizer Cylinder Bore and Rod Verification \u2014 Technical Specifications<\/h2>\n

The specifications below are the authoritative engineering data for the HCY11112023 (specification model HCYY11112023). All dimensional and pressure parameters must be verified against the original crane OEM drawing and the measured existing cylinder before any replacement or production decision is finalized.<\/p>\n

<\/p>\n

\n
\n

Cylinder Bore<\/p>\n

\u03a6140 mm<\/p>\n

Piston bore \u2014 determines vertical support force at rated pressure; substantially larger than the extension cylinder bore<\/p>\n<\/div>\n

\n

Piston Rod Diameter<\/p>\n

\u03a6120 mm<\/p>\n

Rod-to-bore ratio approx. 86% \u2014 large rod provides high column stability under compressive vertical reaction load<\/p>\n<\/div>\n

\n

Stroke<\/p>\n

640 mm<\/p>\n

Vertical extension range \u2014 determines maximum ground clearance adjustment and leveling travel available at each outrigger point<\/p>\n<\/div>\n

\n

Installation Distance<\/p>\n

983 mm<\/p>\n

Pin-to-pin retracted length \u2014 must match the outrigger beam end structure geometry precisely<\/p>\n<\/div>\n

\n

Working Pressure<\/p>\n

30 MPa<\/p>\n

Normal continuous operating pressure \u2014 higher than the extension cylinder circuit, reflecting the vertical load-bearing requirement<\/p>\n<\/div>\n

\n

Max. Withstand Pressure<\/p>\n

40 MPa<\/p>\n

Peak structural limit \u2014 not recommended as a continuous operating pressure; approximately 1.33\u00d7 the working pressure<\/p>\n<\/div>\n

\n

Cylinder Weight<\/p>\n

123 kg<\/p>\n

Requires mechanical assistance for field replacement; not a hand-carry unit<\/p>\n<\/div>\n

\n

Specification Format<\/p>\n

\u03a6140 \u00d7 \u03a6120 \u00d7 640<\/p>\n

Bore \u00d7 Rod Diameter \u00d7 Stroke (mm)<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\"HCY11112023<\/div>\n

Fig. 1 \u2014 CAD dimensional drawing for HCY11112023 (specification model HCYY11112023). All replacement orders should be confirmed against the original crane engineering drawing and the measured existing cylinder before production.<\/p>\n

<\/p>\n

Engineering Analysis \u2014 Crane Outrigger Support Cylinder Vertical Load Capacity and Column Stability<\/h2>\n

Every parameter in the HCY11112023 specification relates directly to its ability to support the crane’s reaction load safely throughout the lift cycle. The following analysis addresses the critical engineering questions that technically informed buyers should be asking.<\/p>\n

Bore: 140 mm \u2014 Vertical Force Generation at Working Pressure<\/h3>\n

The 140 mm bore defines the effective pressurized piston area and therefore the cylinder’s theoretical vertical support force. At the rated working pressure of 30 MPa, the calculation is as follows:<\/p>\n

\n

Effective piston area (A):<\/strong><\/p>\n

A = \u03c0 \u00d7 (0.140 m)\u00b2 \/ 4 = \u03c0 \u00d7 0.0196 \/ 4 \u2248 0.015394 m\u00b2<\/p>\n

Theoretical extension force (F) at working pressure (30 MPa):<\/strong><\/p>\n

F = 30,000,000 Pa \u00d7 0.015394 m\u00b2 \u2248 461.8 kN (approximately 47.1 tonnes-force)<\/strong><\/p>\n

Note: This is a theoretical hydraulic force based on full bore area and rated working pressure. Actual available support force will be reduced by seal friction, hydraulic losses, and system pressure drop under dynamic operating conditions. The load that each outrigger cylinder must carry is not fixed \u2014 it varies with lifting radius, slewing angle, load weight, and dynamic factors including load swing and wind loading.<\/p>\n<\/div>\n

Approximately 461 kN theoretical extension force per outrigger support cylinder represents substantial vertical load capacity. This force is what keeps the crane chassis elevated and level against the combined weight of the crane and its payload. However, buyers should note that the hydraulic force generated at the cylinder bore is the mechanism<\/em> of support \u2014 the actual structural integrity of the crane during operation also depends on the outrigger beam structure, the outrigger pad and ground conditions, and the correct functioning of the load-holding valves that prevent pressure loss from the support circuit during the lift.<\/p>\n

Piston Rod Diameter: 120 mm \u2014 Column Stability Under Compressive Vertical Load<\/h3>\n

The 120 mm piston rod diameter relative to the 140 mm bore gives a rod-to-bore ratio of approximately 86%. This very high ratio is characteristic of vertically loaded jack cylinders and reflects the dominant structural concern in this application: column buckling under the compressive vertical reaction load.<\/p>\n

When the crane is fully set up and lifting, the outrigger support cylinder’s rod is extended downward and loaded in compression \u2014 the entire weight of the crane’s share of the load pushes down through the rod toward the ground pad. The piston rod in this condition behaves as a structural column. Its resistance to lateral deflection under this compressive load \u2014 its column stability \u2014 depends on the rod’s cross-sectional area, its length when extended, and the end-restraint conditions provided by the pin connections and the ground surface reaction through the outrigger pad.<\/p>\n

A replacement cylinder with a thinner piston rod \u2014 even if its bore and pressure rating appear equivalent \u2014 may have meaningfully inferior column stability at the extended lengths required by this application. For a 640 mm stroke cylinder, the rod at full extension reaches a length that makes the rod-to-bore ratio a genuine structural variable, not merely a parameter that affects retraction force. Buyers evaluating alternative cylinder specifications should specifically confirm that the piston rod diameter is not reduced in any substitute product.<\/p>\n

Stroke: 640 mm \u2014 Leveling Range and Ground Clearance Accommodation<\/h3>\n

The 640 mm stroke defines the maximum vertical travel available at each outrigger support point. This travel serves two overlapping purposes. First, it provides the ground clearance compensation \u2014 the range of vertical extension needed to lift the crane’s road wheels clear of the ground surface. Second, it provides the leveling margin \u2014 the differential extension between the four outrigger cylinders that allows the crane to be brought to level when the ground surface is sloped or uneven.<\/p>\n

If a replacement cylinder has a shorter stroke than 640 mm, the crane may be unable to achieve full chassis lift on softer ground (where the outrigger pads sink further into the ground surface, consuming some of the available stroke), or may be unable to level on steeper terrain where a large differential between opposite cylinders is required. The stroke must match the original specification to preserve the crane’s full site-versatility as designed by the manufacturer.<\/p>\n

Installation Distance: 983 mm \u2014 The Retracted Geometry at the Outrigger Beam End<\/h3>\n

The installation distance of 983 mm is the centre-to-centre pin distance in the fully retracted position. In a vertical jack cylinder, this dimension defines where the cylinder sits within the outrigger beam end structure when the cylinder is stowed. If this dimension is incorrect \u2014 if the replacement cylinder is shorter or longer in the retracted condition \u2014 the cylinder will either not reach its mounting pin positions, or will stand proud of the beam end structure, preventing correct attachment or causing mechanical interference with the beam end box section. Confirming this dimension against the crane drawing and the measured existing cylinder is as important as confirming the stroke and bore.<\/p>\n

Working Pressure 30 MPa vs. Maximum Withstand Pressure 40 MPa<\/h3>\n

The working pressure of 30 MPa is the normal, continuous operating pressure at which this cylinder delivers its rated support force. The 40 MPa maximum withstand pressure is a structural peak limit \u2014 not a recommended operating target. It is important to understand that if the crane’s hydraulic system pressure-relief valve is set incorrectly and allows pressure to rise above the working pressure toward the withstand pressure limit during the outrigger support circuit operation, the additional force will not be productively useful \u2014 the crane is already supported \u2014 but the elevated pressure will accelerate seal wear and increase fatigue loading on the cylinder’s end cap welds and body. The hydraulic circuit serving the outrigger support cylinders should be set and verified to operate at 30 MPa working pressure.<\/p>\n

<\/p>\n

Crane Outrigger Support Cylinder Installation Position \u2014 Vertical Jack Location on the Deployed Outrigger Beam<\/h2>\n

The installation diagram below places the HCY11112023 in context within the crane’s full outrigger and boom cylinder system. The outrigger support cylinder is positioned at the outer end of the deployed outrigger beam, oriented vertically to extend the outrigger foot pad to the ground. Its position in relation to the crane’s slewing center determines the moment arm of the outrigger reaction force relative to the crane’s tipping edge.<\/p>\n

\"Crane<\/div>\n

Fig. 2 \u2014 Installation position of the HCY11112023 outrigger support cylinder at the deployed outrigger beam end, shown relative to the extension cylinder and main boom luffing cylinder positions.<\/p>\n

In most truck crane outrigger designs, the support cylinder is housed within or attached to a vertical guide housing at the end of the outrigger beam. This housing constrains the cylinder against lateral movement during extension and load-bearing, and transfers horizontal loads from the outrigger pad \u2014 particularly from crane slewing dynamic forces and from uneven ground contact \u2014 into the beam structure rather than into the cylinder rod. The condition of this guide housing is directly relevant to the outrigger support cylinder’s service life. A worn, bent, or structurally compromised guide housing will impose side loads on the cylinder rod that the cylinder was not designed to carry independently.<\/p>\n

<\/p>\n

Side Loading, Ground Conditions, and Crane Stability \u2014 Why Vertical Alignment Is Critical<\/h2>\n

The outrigger support cylinder is designed to operate under predominantly axial compressive loading \u2014 the ground reaction force acts directly upward along the cylinder’s longitudinal axis, and the crane load pushes directly downward along the same axis. In this ideal condition, the cylinder rod is in pure compression and the rod seal, guide bush, and piston experience only the loads they were designed for.<\/p>\n

In practice, several factors can introduce side loading into an outrigger support cylinder, and maintenance engineers should be aware of all of them:<\/p>\n

    \n
  • Sloped ground surface:<\/strong> When the outrigger pad rests on a sloped surface, the ground reaction force has a horizontal component. This horizontal component is transmitted upward through the outrigger pad into the cylinder rod as a lateral force. On moderately sloped sites, this is managed through the crane’s outrigger pad design and the guide housing around the cylinder. On severely sloped sites, additional cribbing to create a level pad surface is essential to limit the horizontal load component.<\/li>\n
  • Crane slewing dynamics:<\/strong> When the crane slews under load, the dynamic force of the rotating superstructure introduces momentary asymmetric loading across the outrigger support points. This creates a pulsating side-load component that is absorbed partly by the guide housing structure and partly by the cylinder itself. High-cycle slewing operations on a heavily loaded crane accelerate outrigger cylinder wear more rapidly than static load-holding alone.<\/li>\n
  • Outrigger guide housing wear:<\/strong> Over time, the guide housing that constrains the cylinder against lateral movement wears at its contact surfaces with the cylinder body or outer tube. As this clearance grows, more of the horizontal load component is transmitted directly into the cylinder rod through the guide bush rather than being absorbed by the housing structure. Regular inspection and maintenance of the guide housing is a preventive measure for cylinder longevity.<\/li>\n
  • Outrigger pad settlement:<\/strong> On soft ground, an outrigger pad can settle unevenly during a lift \u2014 one edge sinking deeper than the other \u2014 introducing a tilting moment into the cylinder. Appropriate cribbing, ground preparation, or the use of large-area outrigger pads distributes the contact force and reduces settlement-induced tilt.<\/li>\n<\/ul>\n

    A buyer replacing an outrigger support cylinder should assess the condition of the outrigger guide housing at the same time. Installing a new cylinder into a worn or damaged guide housing will expose the new cylinder to the same side-load conditions that contributed to the original cylinder’s deterioration.<\/p>\n

    <\/p>\n

    Load Holding and Pressure Stability \u2014 Maintaining Outrigger Position Throughout the Lift<\/h2>\n

    Once the crane is leveled and the lifting operation begins, the outrigger support cylinders must maintain their individually set extension positions throughout the entire lift \u2014 from pick to set to final position. Any retraction of an outrigger support cylinder during a lift changes the load distribution across the four outrigger points and alters the crane’s actual tipping geometry relative to what its load chart assumes. Even a small amount of drift can introduce a cumulative risk that is invisible to the operator without outrigger monitoring instrumentation.<\/p>\n

    Hydraulic drift in an outrigger support cylinder can arise from several sources. Piston seal deterioration allows fluid to bypass between the extension and retraction sides of the piston, allowing the cylinder to slowly retract under load. A faulty or incorrectly adjusted load-holding valve allows the captured hydraulic pressure to bleed down, reducing the support force and permitting rod retraction. Contaminated hydraulic fluid can accelerate seal wear and damage valve seats. In any of these cases, the visible symptom \u2014 the crane’s chassis settling slightly during a lift, or a change in the crane’s level reading on a long lift \u2014 may only appear after the underlying condition has already progressed significantly.<\/p>\n

    When evaluating a replacement outrigger support cylinder, the condition and setting of the load-holding valves in the support circuit should be verified at the same time. Replacing the cylinder without verifying the load-holding valve system leaves the most critical active safety component in the circuit unaddressed.<\/p>\n

    <\/p>\n

    Inspection and Service Life Management for the Crane Outrigger Support Hydraulic Cylinder<\/h2>\n

    An outrigger support cylinder that is correctly installed, operated within its design parameters, and regularly inspected can provide many years of reliable service. The following inspection points define a systematic approach to assessing cylinder condition and planning replacement before failure in service:<\/p>\n

      \n
    • Rod surface inspection:<\/strong> The piston rod surface in the wiper and rod-seal contact zone should be inspected for scoring, pitting, corrosion, and chrome layer condition at each scheduled service. The rod is exposed to the outdoor environment whenever the cylinder is retracted, making corrosion a more significant risk on outrigger cylinders than on internally housed cylinders. A protective sleeve or rod wiper in good condition is the first line of defence.<\/li>\n
    • External leakage check:<\/strong> Visible oil accumulation around the rod seal, at port connections, or at end-cap joints should be investigated promptly. External leakage is an early indicator of seal deterioration and, if left unaddressed, leads to progressive pressure loss and eventual inability to hold the crane level during long operations.<\/li>\n
    • Internal leakage (piston seal) assessment:<\/strong> The piston seal condition can be assessed by pressurizing the extension side of the cylinder with the rod-end port open to a low-pressure return and checking for flow from the rod-end port, which indicates piston seal bypass. This test should be performed at the crane’s normal working pressure, not at the maximum withstand pressure.<\/li>\n
    • Mounting pin and bushing inspection:<\/strong> The mounting pins at both the upper (beam-end) attachment and the lower (outrigger pad) attachment should be checked for diameter wear, surface condition, and secure retention. Worn pins increase lateral play in the cylinder’s end connections and are an early source of side-load damage.<\/li>\n
    • Structural weld inspection:<\/strong> Any visible cracks, distortion, or paint cracking at weld zones \u2014 particularly at the end cap welds, port pad welds, and trunnion or lug welds \u2014 should be investigated by a qualified inspector. Structural weld inspection on a cylinder that may have experienced shock loading or overload is a safety-critical item.<\/li>\n
    • Outrigger guide housing inspection:<\/strong> As discussed above, the guide housing condition affects the side-load regime experienced by the cylinder. Check guide housing wear surfaces, deformation, and structural integrity at the same time as the cylinder inspection.<\/li>\n<\/ul>\n

      <\/p>\n

      OEM and Aftermarket Procurement \u2014 Replacing the Mobile Crane Jack Cylinder Correctly<\/h2>\n

      At 123 kg, the HCY11112023 is a substantial replacement component that requires mechanical handling equipment for safe installation. The replacement process requires the crane to be positioned on a firm, level surface with all loads removed, the outrigger hydraulic circuit depressurized, and the outrigger beam positively supported before the cylinder is disconnected. Field replacement without adequate support of the outrigger beam or without full circuit depressurization is dangerous and must not be attempted.<\/p>\n

      For crane fleets with multiple machines of the same model, it is worth confirming whether all machines in the fleet use the same outrigger support cylinder specification. Even within a single crane model family, the outrigger cylinder specification may have changed between production batches or serial number ranges. Confirming the specification against the individual crane’s serial number \u2014 not just the model name \u2014 is essential before ordering replacement stock.<\/p>\n

      OEM buyers integrating this cylinder into new crane production should provide the crane’s outrigger beam end-structure drawing, the required mounting pin diameters and lug widths, the required port thread standard and positions, and the hydraulic circuit working pressure. A pre-production drawing exchange \u2014 in which the cylinder manufacturer provides a dimensional confirmation drawing for the buyer’s approval before production begins \u2014 is recommended for all OEM integration projects involving this class of structural cylinder.<\/p>\n

      <\/p>\n

      \n

      Technical Information Checklist \u2014 Crane Outrigger Support Cylinder Inquiry<\/h2>\n

      Provide the following information to enable accurate engineering review and quotation for the HCY11112023 or a compatible replacement:<\/p>\n

      \n
      Crane make, model, and serial number<\/div>\n
      Original cylinder model number and nameplate photograph<\/div>\n
      Photographs of the existing cylinder installed in the outrigger beam end<\/div>\n
      Measured bore diameter and piston rod diameter<\/div>\n
      Measured stroke and installation distance<\/div>\n
      Mounting pin diameter at head end and rod end<\/div>\n
      Lug or clevis width at both ends<\/div>\n
      Hydraulic port thread form, size, and position<\/div>\n
      Hydraulic working pressure in the outrigger support circuit<\/div>\n
      OEM engineering drawing (if available)<\/div>\n
      Outrigger guide housing internal dimensions (if replacing due to guide wear damage)<\/div>\n
      Required quantity and delivery schedule<\/div>\n<\/div>\n<\/div>\n

      <\/p>\n

      Frequently Asked Questions \u2014 Hydraulic Outrigger Jack Cylinder for Mobile Crane<\/h2>\n
      \n
      \n

      Why does the outrigger support cylinder have a much larger bore than the extension cylinder?<\/h3>\n

      The two cylinders perform fundamentally different tasks at different force levels. The extension cylinder moves a sliding beam horizontally against friction \u2014 a relatively low-force positioning task. The support cylinder must generate enough vertical hydraulic force to support a share of the entire crane weight plus its lifted load against gravity \u2014 a high-force structural task. The HCY11112023’s 140 mm bore and 30 MPa working pressure produce approximately 461 kN of theoretical support force, which is appropriate for the vertical reaction loads carried by each outrigger point during crane operations. The extension cylinder’s 70 mm bore at 20 MPa produces approximately 77 kN \u2014 adequate for horizontal beam sliding, but nowhere near sufficient for vertical load-bearing at crane scale.<\/p>\n<\/div>\n

      \n

      Why is the piston rod diameter so large relative to the bore \u2014 120 mm rod in a 140 mm bore?<\/h3>\n

      The 86% rod-to-bore ratio is a direct response to the column stability requirement of a vertically loaded jack cylinder. When extended under the full crane reaction load, the piston rod acts as a structural column in compression. A large-diameter rod has substantially greater resistance to lateral buckling than a thinner rod, allowing the cylinder to safely carry the required compressive load across its full stroke range. Buyers evaluating alternative specifications should not accept a substitute cylinder with a thinner piston rod without a full engineering review of the column stability margin at the specified stroke and load conditions.<\/p>\n<\/div>\n

      \n

      My crane is settling slowly during long lifts \u2014 is the outrigger support cylinder the cause?<\/h3>\n

      Gradual chassis settlement during a lift can result from piston seal deterioration in the support cylinder, a faulty load-holding valve in the outrigger support circuit, or both. The piston seal allows hydraulic fluid to bypass across the piston when it deteriorates, allowing the cylinder to retract slowly under load. The load-holding valve, if it is leaking past its seat or is incorrectly set, allows hydraulic pressure to bleed from the captured circuit. Diagnosing which component is at fault requires a systematic hydraulic test of both the cylinder and the valve. Replacing the cylinder without addressing a faulty load-holding valve will not resolve the problem.<\/p>\n<\/div>\n

      \n

      Can this cylinder be used on sloped ground without additional ground preparation?<\/h3>\n

      The cylinder can accommodate site slope within the crane’s specified leveling range by extending to different lengths at each outrigger point. However, on sloped ground the ground reaction force is not purely vertical \u2014 it has a horizontal component that introduces side loading into the cylinder rod. For moderate slopes within the crane manufacturer’s specified limits, the cylinder and guide housing are designed to absorb this. For steeper slopes, or for soft ground where the outrigger pad can tilt, cribbing the outrigger pads to create a level surface is essential to keep the cylinder loading within its design parameters. Always refer to the crane’s operating manual for the maximum permitted site slope without additional ground preparation.<\/p>\n<\/div>\n

      \n

      Is a pre-production dimensional drawing available before I place an order?<\/h3>\n

      A pre-production dimensional confirmation drawing can be prepared for review before manufacturing begins. This drawing allows the buyer to verify all critical dimensions \u2014 bore, rod diameter, stroke, installation distance, port positions, port thread forms, mounting pin diameters, and lug widths \u2014 against the crane’s own engineering data before the cylinder is manufactured. This process is strongly recommended for any replacement of a structural crane cylinder, and it is a standard part of the OEM integration process for new crane production orders.<\/p>\n<\/div>\n

      \n

      The product display name says HCY11112023 but the specification model says HCYY11112023 \u2014 which is correct?<\/h3>\n

      Both references are preserved as supplied without modification. The product display name is HCY11112023 and the specification model reference is HCYY11112023. These are the two designations as provided in the engineering data, and no additional model number has been inferred or created. When submitting an inquiry, please reference both designations along with the full specification \u2014 bore, rod diameter, stroke, and installation distance \u2014 to ensure precise identification of the correct cylinder for your application.<\/p>\n<\/div>\n<\/div>\n

      <\/p>\n

      \n

      Request Technical Evaluation \u2014 HCY11112023 Crane Outrigger Support Hydraulic Cylinder<\/p>\n

      Share your crane model, existing cylinder nameplate, measured dimensions, photographs, or OEM drawing. Our engineering team will review your outrigger support cylinder replacement or integration requirements and provide a dimensional confirmation drawing, technical assessment, and commercial quotation.<\/p>\n

      \n
      \ud83d\udcd0 Send Your OEM or Crane Drawing<\/div>\n
      \ud83d\udcf7 Send Cylinder and Outrigger Photos<\/div>\n
      \ud83d\udccb Request Pre-Production Drawing<\/div>\n
      \ud83d\udce6 Ask About OEM and Fleet Orders<\/div>\n<\/div>\n

      Request a Quotation \u2192<\/a><\/p>\n

      Engineering review \u00b7 Pre-production dimensional drawing confirmation \u00b7 OEM and fleet replacement orders welcome<\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

      Mobile crane outrigger support jack hydraulic cylinder, \u03a6140\u00d7\u03a6120\u00d7640mm, 30MPa working pressure, 461.8kN theoretical force, 123kg. Vertical stabilizer jack for truck crane outrigger systems. Request OEM drawing and quotation.<\/p>","protected":false},"featured_media":1723,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[114],"product_tag":[],"class_list":["post-1752","product","type-product","status-publish","has-post-thumbnail","product_cat-crane-hydraulic-cylinder","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/ever-powers.com\/nl\/wp-json\/wp\/v2\/product\/1752","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ever-powers.com\/nl\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/ever-powers.com\/nl\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ever-powers.com\/nl\/wp-json\/wp\/v2\/media\/1723"}],"wp:attachment":[{"href":"https:\/\/ever-powers.com\/nl\/wp-json\/wp\/v2\/media?parent=1752"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/ever-powers.com\/nl\/wp-json\/wp\/v2\/product_brand?post=1752"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/ever-powers.com\/nl\/wp-json\/wp\/v2\/product_cat?post=1752"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/ever-powers.com\/nl\/wp-json\/wp\/v2\/product_tag?post=1752"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}