da ep | Ago 18, 2026 | ISBM Machine Blog
A 500ml beverage bottle and a 22L chemical container share a material — PET — and a forming process — injection stretch blow molding. That is where the commonality ends. Wall thickness, clamping stroke, blow air volume, cooling water demand, and the entire tooling... da ep | Ago 18, 2026 | ISBM Machine Blog
Recycled PET (rPET) is no longer a premium niche material — it is a procurement requirement for beverage producers selling into the EU market under the EU Single-Use Plastics Directive mandatory rPET content targets (25% from 2025, 30% from 2030 for beverage bottles)... da ep | Ago 18, 2026 | ISBM Machine Blog
Pesticide and agrochemical containers that are transported or exported must comply with UN certification requirements for dangerous goods packaging — a mandatory standard that imposes specific structural performance criteria on the container, and by extension,... da ep | Ago 18, 2026 | ISBM Machine Blog
A carbonated soft drink (CSD) bottle and a still water bottle share the same resin, the same blow molding process, and often the same filling line. The machine settings, preform design, and container geometry that produce an acceptable still water bottle will produce... da ep | Ago 18, 2026 | ISBM Machine Blog
A 10,000 BPH water bottling line is not a single machine decision — it is a systems engineering problem. The blow molding machine is one node in a production chain that includes high-pressure air supply, preform conditioning, chilled water, filling and capping, and... da ep | Ago 18, 2026 | ISBM Machine Blog
Every food container manufacturer choosing blow molding equipment faces the same process choice: one-step injection stretch blow molding (ISBM), where the preform is injected and blown in the same machine and cycle; or two-step stretch blow molding (SBM), where...